SQ15 Aqua Plus 8-in-1 Hydro Facial Machine
The SQ15 Aqua Plus 8-in-1 combines hydro cleansing with eight crystal tips, nano mist, microcurrent, ultrasound, cooling and LED light in one facial workstation.
The Complete Hydro Facial Station, in One Trolley-Friendly Box
The SQ15 Aqua Plus is the 8-in-1 configuration of our hydro facial platform. A vortex suction pen with eight crystal tips handles deep bubble cleansing, an oxygen injection gun mists skin with nano-fine hydration, and six more handpieces — microcurrent lifting and tightening probes, an ultrasonic head, an ultrasonic scrubber, a blu-ray ice hammer and a seven-color LED mask — cover the rest of the facial from start to finish.
Everything is driven from a physical control panel: solution type keys for the four solution bottles, suction and flow knobs, a 20-level microcurrent dial and a timer that runs in 5-minute steps up to 30 minutes. No screen menus — every adjustment is a key press or a knob turn away.
Details at a glance
The full 8-in-1 set: colorful LED mask, lifting head, tight head, ultrasonic head, shovel, bubble pen, ice hammer and oxygen lance.
Built for the Treatment Room
The vortex suction pen sprays solution in a spiral motion while negative pressure lifts away loosened dirt, oil and aging keratin — the classic hydro facial cleanse. Eight interchangeable crystal tips adapt the pen to different areas, and it can even be used for scalp care.
Suction strength and solution flow adjust independently with two front knobs, so the therapist can go gentle around the nose wings and stronger across the T-zone.
Finish Under Seven Colors of Light
The included photon mask covers red 630nm, blue 470nm, green 520nm and yellow 590nm, plus purple (a red-and-blue dual frequency), cyan-blue and white. It mounts on the machine’s mask bracket between sessions and settles over the client’s face as a relaxing final step.
Cool Down, Mist Up
A Scrubber with Four Moods
The ultrasonic shovel glides over damp skin to lift away loosened debris, with four on-body modes — Aqua Plus, Lifting, Moisturizing and Cleansing — selected at the press of its own button. Together with the ultrasonic massage head and the two microcurrent probes (a Y-shaped lifting roller and a three-ball tightening head), it rounds out the middle steps of the facial.
Every Adjustment, Right on the Panel
Two digital displays track time and microcurrent intensity (up to 20 grades — start low and work up). Dedicated keys select the lifting or tightening probe (the two never run at once) and the SA1–4 solution channels, while the large silver knobs set suction and flow. The timer adjusts in 5-minute steps from a 20-minute default up to 30, and pauses automatically at zero.
Front, side and back: solution placement box, waste water cup, mask bracket and clearly laid-out interfaces for every handpiece.
How to Use
- Fill the solution bottles (positions 1–4; bottle No.4 at the back is for clear water) and connect the handpieces you need.
- Power on, select the solution channel (SA1–4), then press the negative-pressure key and set the timer (5-minute steps, 30 minutes max, 20-minute default).
- Cleanse with the suction pen: start suction low and flow moderate, working from the center of the face outward. Pause the negative pressure before switching solution channels.
- Follow with the ultrasonic shovel or ultrasonic head, then the microcurrent probes — lifting or tightening, one at a time, intensity starting low (up to 20 grades). Always switch the microcurrent off before changing probes.
- Mist with the oxygen gun (purified water, saline or diluted toner), then calm the skin with the ice hammer, and finish with the seven-color LED mask.
- After each session, flush the spray gun with clean water until the pipes run clear, empty the waste water cup and wipe the machine down — residues left inside can block the instrument.
FAQ
Specifications
| Product Name | Aqua Plus 8-in-1 Hydra Facial Machine |
| Model | SQ15 |
| LED Mask Colors | Red 630nm · Blue 470nm · Green 520nm · Yellow 590nm · Purple · Cyan-blue · White |
| Controls | Timer 5-min steps (default 20, max 30) · microcurrent up to 20 grades · suction & flow knobs · SA1–4 solution keys |
| Power Supply | AC 110–240V · 50/60Hz · 70W |
| Plug Type | US / EU / UK / AU Plug |
| Product Size | 490 Ă— 420 Ă— 370 mm (per manual) |
| Weight | 13 kg ±10% |
One-year warranty. Keep the machine away from high temperature and humidity; never rinse it with water or wipe with chemicals.
What’s in the Box
Disclaimer: The device is a cosmetic beauty device, not medical equipment. It is intended for aesthetic skin care use only, not for disease diagnosis or treatment. Stop use immediately if the skin feels uncomfortable. Individual experience may vary.
Safety notes from the manual: Choose the appropriate probe and intensity to avoid skin injury, and start microcurrent at a low grade. Pause the negative pressure before switching solution channels, and turn the microcurrent off before changing probes. Use only water-like or diluted skincare liquids. Flush the spray gun and clean the instrument after every session to prevent blockage. Do not wash the machine with water, wipe it with chemicals, or store it in hot, humid or dusty places; unplug it if unused for more than seven days; keep it out of children’s reach and never disassemble it yourself.
International mains compatibility: 110–240 V AC.